This standalone data logger can record over 1,000,000 events, state changes and count events. Fast logging rates allow event capturing at speeds of up to four times per second and state changes at speeds of up to two times per second. Event counting can operate at speeds of up to 100 times per second (when the LED’s are turned off). The data logger is supplied with a cap featuring a pair of screw terminals and measurement leads terminating in crocodile clips. Easily set up the logger and view downloaded data by plugging the unit into a PC’s USB port and using the free EasyLog software provided. Data can then be graphed, printed and exported to other applications for detailed analysis. Supplied with ½AA battery and wall mount clip.
EasyLog | EL-USB-5+
€76,49 ex. tax
Event, Count and State Data Logger with USB
10 in stock (can be backordered)
EasyLog | EL-USB-5+
€76,49 ex. tax
| Maximum Event / State Change Frequency | 2Hz |
| Maximum Count / Count Per Frequency | 100Hz |
| Minimum time in State | 100ms |
| Input Voltage | 3 to 28V d.c. |
| Battery Life | 1 Year |
Why aren’t my batteries working?
If left unused for extended periods of time lithium metal batteries, including those used in the EasyLog range of data loggers, naturally form a non-conductive internal layer – a Passivation layer – preventing them from self-discharge and effectively increasing their shelf life. When first installed in the data logger, this may cause a momentary drop in the battery voltage (the Transient Minimum Voltage) as the internal layer is broken down, resulting in the data logger resetting. Inserting the batteries in the data logger and leaving it connected to a PC for about 30 seconds will remove this layer. After this, remove and re-install the batteries to reset the data logger. Overall battery life will not be affected.
Related products
-
Event, Count & State
-
Temperature Data Loggers
-
Temperature Data Loggers
-
Temperature Data Loggers
