This standalone data logger records and displays over 32,000 temperature readings from the supplied thermistor probe. The EL-USB-TP-LCD features an LCD and push-button which allow the user to cycle through the most recent, highest and lowest stored readings. The EL-WIN-USB software enables quick configuration and data download via the USB port available to download for free. Supplied with thermistor probe and long-life lithium battery.
EasyLog | EL-USB-TP-LCD
€101,49 ex. tax
Thermistor Probe Data Logger with LCD
14 in stock (can be backordered)
EasyLog | EL-USB-TP-LCD
€101,49 ex. tax
| Measurement range | -40 to 125°C (-40 to 257°F) |
| Accuracy | ±0.6°C (-5 to 40°C) |
| Logging rate | User selectable between 1 second and 12 hours |
| Operating temperature | -35 to +80°C (-31 to +176°F) (data logger only) |
| Battery life | 2 Years |
| Calibration Certificate | Available Separately |
| Probe Cable Length | 1m (39.4″) |
-
Accessories
Why aren’t my batteries working?
If left unused for extended periods of time lithium metal batteries, including those used in the EasyLog range of data loggers, naturally form a non-conductive internal layer – a Passivation layer – preventing them from self-discharge and effectively increasing their shelf life. When first installed in the data logger, this may cause a momentary drop in the battery voltage (the Transient Minimum Voltage) as the internal layer is broken down, resulting in the data logger resetting. Inserting the batteries in the data logger and leaving it connected to a PC for about 30 seconds will remove this layer. After this, remove and re-install the batteries to reset the data logger. Overall battery life will not be affected.
Related products
-
Temperature Data Loggers
-
Temperature Data Loggers
-
Temperature Data Loggers
-
Temperature Data Loggers
