This standalone data logger measures more than 32,000 readings over a 0 to 30V d.c. range at a resolution of 50 mV d.c. The data logger is supplied with a 0 to 30V d.c. cap featuring a pair of screw terminals and measurement leads terminating in crocodile clips. Easily set up the logger and view downloaded data by plugging the unit into a PC’s USB port and using the free EasyLog software available for download. Data can then be graphed, printed and exported to other applications for detailed analysis. Supplied with ½ AA battery and wall mount clip.
EasyLog | EL-USB-3
€64,99 ex. tax
Voltage Data Logger with USB
15 in stock (can be backordered)
EasyLog | EL-USB-3
€64,99 ex. tax
| Measurement Range | 0 to 30V d.c. |
| Accuracy | ±1% |
| Readings | 32,510 |
| Logging Rate | User selectable between 1 second and 12 hours |
| Battery Life | 3 Years |
Why aren’t my batteries working?
If left unused for extended periods of time lithium metal batteries, including those used in the EasyLog range of data loggers, naturally form a non-conductive internal layer – a Passivation layer – preventing them from self-discharge and effectively increasing their shelf life. When first installed in the data logger, this may cause a momentary drop in the battery voltage (the Transient Minimum Voltage) as the internal layer is broken down, resulting in the data logger resetting. Inserting the batteries in the data logger and leaving it connected to a PC for about 30 seconds will remove this layer. After this, remove and re-install the batteries to reset the data logger. Overall battery life will not be affected.
Related products
-
Voltage & Current
-
Temperature Data Loggers
-
Temperature Data Loggers
-
Temperature Data Loggers
