LogTag Battery Replacement

1. Remove the screw from the rear compartment lid.

2. Remove the existing batteries

3. When using different batteries to the one’s we recommend, you may need to bend the two metal tabs, marked below, slightly inwards with a soft tool, to ensure good contact with the battery terminals.

4. Insert the new AAA batteries in the correct orientation, as shown. The polarity is marked inside the battery compartment.
We recommend high-quality Energizer Ultimate batteries, as they have a special long-life chemistry.

The battery compartment is a good place to keep the surplus sensor socket covers. You may wish to remove these now for each channel you want to use and add them to the compartment before closing it.

5. Replace the rear cover and the screw.

6. As a last step, press any button on the front to turn on the display.

A guide to change the CR2032 batteries can be found here.

If you operate a logger with a flat battery, you risk that the logger suffers memory corruption as a result, which may cause a loss of data.